Course review of Encinitas Ranch, Page 20
Golf equipment roundtable, Page 32
My Southland Golf connection afforded me a unique opportunity last Saturday.
I was one of about 15 or so golfers to participate in a club test for much of the latest equipment by the major manufacturers.
This was conducted at Oak Creek in Irvine, which was holding a huge demo day featuring TaylorMade, Callaway, Nike, Cobra Puma, Ping and Cleveland.
The task was to hit each company’s clubs in four categories (driver, fairway wood, hybrid and irons) and rate each 1-5 (five being the best) on performance in four characteristics – distance, control, feel and look.
If that sounds daunting, it’s because it is. Trying to be fair and thorough, it took me four hours to get through this exercise, which I didn’t completely complete (more on that later).
I’d never had a chance to test clubs en masse like this before, which is why I was eager to participate.
Through my work with Southland and my time at the Golf Academy, I was most familiar with the clubs from TaylorMade and Callaway and least familiar with Nike. I’d never hit one of their clubs before and couldn’t recall playing with even one person who had their driver.
Anyway, since equipment has become a bit of a writing niche for me, I thought this experience was essential to having me be properly knowledgeable.
I’m not going to divulge the results here (you’ll be able to find them in the April issue of Southland Golf), but what I wanted to do with this post is mostly relate the experience and relay some general findings. For now, the blog is going to avoid specific club recommendations/endorsements, but if you email me, I can help you the best I can. I’ve been getting more of these type questions recently as people are pondering purchases.
First, I should give you the set up of my bag, so you know my biases. My clubs have mostly all been fitted for me, and I consider my bag to be settled, save for a potential new driver purchase, although you’ll read later while I’m wavering on that.
So, my bag …
Driver/3-wood – the Stage 2 TaylorMade Rocketballz. Yes, it’s my driver, too, and the rock star of my golf bag. Golf friends of mine actually will get upset with me if I try to hit something else off the tee.
I actually have a Callaway Ignite 10.5 and only old TaylorMade 9.5 Steelhead I carry on occasion, mostly because they hit a straighter ball for me and my RBZ hits a great little draw – and a long way.
Hybrid – Nickent, 19 degree.
Irons – Mizuno JPX-825.
Wedges – Mizuno and Cleveland (56)
Putter – Cleveland blade that I bought used last year and love.
So this was the standard the new clubs were up against. Like I said, I feel this set up works for me and I’ve acquired nearly all of it in the last year, so I don’t feel much impulse to change at the moment.
That said, I was certainly curious to see how the new gear performs, especially after having written and read so much about it recently.
The first challenge I encountered was simply to set up a model for the test. I really wasn’t given one and wanted to come up with a method that was fair.
I decided not to judge a club’s performance until I felt I could hit five consecutive good shots with it. This allowed for some acclimation time with set up, tee height, etc., for various clubs. And of those five shots, save for driver, I wanted to hit some of them off the ground and a few off the tee to somewhat simulate a round.
Some quick math of the information provided will tell you this is a lot of golf swings. Too many, actually. Fatigue was the biggest factor. Figuring on that, I hit the least familiar clubs first, to give them my best shot, and saved the more known products for the back end of my session.
My swing hit the wall at least twice, but at times it was hard to tell if it was me or the clubs. I will say there was one manufacturer whose clubs I couldn’t hit at all, so in that case, I don’t have doubt – it was the clubs. Everything seemed to be off, to my feel and my eye, and I probably spent too much time trying to make their gear work for me.
After 20 minutes of futility, I moved on to more familiar equipment and the ball started jumping again immediately.
I got through three company’s sets and then broke for lunch. I then hit two more and while I was testing a TaylorMade driver, it finally happened – rip. Yep, I ripped open a blister on my pinkie finger. And I can’t remember the last time I got a golf blister.
Being a trooper, I Band-Aided it up and soldiered on, but I shortly thereafter DQ’d myself with one equipment company left to go – one I know well, so I wasn’t too concerned about not finishing.
I learned a lot about equipment and what works for me on Saturday. However, given how different swing profiles are, there’s no guarantee what works for me will work for you.
For instance, I seem to be the only golfer I know who can’t hit the mew Titleist driver. I have several friends who own it and love it. I’ve tried it a number of times now and even under optimal set up conditions on Saturday, I got ordinary results at best. I don’t get it because it feels good to me. I just doesn’t wow me after that. And, as I’ve said, I’m the outlier here.
Truth be told, most of the drivers felt heavy to me. This is partly why I favor my 3-wood. I like the lighter weight. I feel like all I have to do is pull it through and I get effortless distance.
That said, I was very curious to test the other 3-woods against my 3-wood, and I have to say they faired quite well. I was probably most impressed with the across-the-board performance in this category.
And that’s why I’m telling a lot of my friends who are inquiring about drivers, “How about a 3-wood?”
Nearly every one I tested seemed to pack a lot of pop for a smaller club. Actually, probably the longest ball I hit all day came off my first swing of a 3-wood. It launched low and was on the end of the range in a blink.
I would seriously look at this option, for performance reasons and a economic ones, before looking at making a biggest investment in a driver.
The other revelation was in hybrids. This is where I found the greatest disparity in performance, and you can really tell the difference from company to company just be looking at the them. The club head sizes ranged from tiny, and I mean the size of a candy bar, to those that were pretty plump, like a 5-wood almost. The size, for me, translated entirely to confidence in the ability to the hit the club. I couldn’t even get the smallest one off the ground. Some of the others, I hit and got surprising distance from.
If I were to make a change, adding a second hybrid is definitely something I’d consider. And as for purchases, I would definitely take your time with this one since there is such a noticeable disparity in what each company offers.
As for irons, I hit some very goods one – and found I got the best performance often with blades – but I didn’t experience anything that would prompt me to change, though I certainly know my next two preferences would be if I had to.
The only thing we didn’t test was putters, but I had my favorite conversation of the day about putters.
I was talking to a tester from LA who was lamenting not testing putters before concluding, “Ah, I always just go back to my old Ping anyway. I can’t rid of it. The thing makes putts.”
I feel the same way about the Cleveland I acquired last year. I don’t always make them, but putting and chipping are the two things I know I can roll out of bed and do every round.
But the LA tester and I got talking about how personal putters are.
“You have your most personal connection with your putter,” he said, and he’s so right. That prompted me to a realization.
When you hit a bad drive, it’s the club.
When you hit a bad iron or wedge shot, it’s the club.
When you miss a putt … it’s you.
Seriously, how often do you blame your putter. After a miss, it’s the green or the read or the stroke. The last thing it is is your putter’s fault. Maybe this is because putting can be just plain hard, but I think it goes back to bond. Our putter became our putter for a reason – at some point it made putts. Putts we obviously still recall and cherish and have endeared us to the club.
Drivers can be flaky, but for some reason, once we trust a putter, it’s considered to be the model of consistency. When it misses, we’re flawed. Maybe because it’s because we inherently hate change and changing putters is a scary thought for many of us.
Anyway, that probably should’ve been its own post, under “Ode to Putters” or something, but it just shows you that the people who tested Saturday take their equipment seriously.
I can tell you in the brief chat I had with a few other testers, we had fairly uniform consensus, so I suspect the results in the issue with be fairly declarative about what people liked and what they didn’t.
You can look forward to that issue in April, but, like I said, if you have questions feel free to email me and I’ll do my best to give insight.
For now, I can tell you Band-Aid brand is still the No. 1 Band-Aid. I’m typing this pain-free and ready for my rounds this week, same mostly reliable clubs in tow.